Services & Machinery
Catalysis Oven HERMES
HERMES is an oven designed specifically to work with resin catalysis of epoxy, polyester and polyurethane. Unlike traditional conventional resin lines, it does not require extensive space and resource waste, as it is fully electrical and it only operates when the slab pass through it, ensuring efficient consumption. Works exclusively with resin material to achieve optimal results. It features the following:
Benefits
HYDROS is an innovative oven that provides the following benefits:
Wide product range:
• B-component epoxy systems of high and medium(A and B) viscosity levels (24-48H)
• B-component polyurethane systems A and B (PUR)
• Polyester and mastics
High Level of Functionality:
Instant start, no preheat or pre-start routine required Selective control by recipe on a touch screen of the specific type of resin and its behavior, such as viscosity, adhesion, filtration, and hardening time. Controllable Tg, enabling in-line production by sending slabs directly to polishing Slabs can be polished after 1 hour. Equally high results for adhesion of net meshing and face finishing Possibility to perform slab meshing and reinforcing in one run due to filtration control, saving costs and time
Production:
Works exceptionally well with natural or artificial stones, ceramics, composite sandwiches, or stone veneers Optionally, a transitional vertical storehouse (only time with no energy consumption) can be implemented into the line when the technical process requires it. No electricity is needed; only time from 20 to 45 minutes. No vacuum units are needed to achieve filtration results in cracks or net cracks, thanks to the sympathetic reaction of the material initiated by the oven during curing
Environmental and Staff Safety:
Does not emit dangerous radiation or vapors harmful to operators Boasts the best energy/productivity ratio in the industry based on the highest product quality.
TECHNICAL DATA
